Archive for April 28, 2012

Flipping a House – Determining How Much You Will Spend on Renovations

I would be very surprised if at some point you have not heard the odd horror story from friends and family members about their latest renovation disaster. One of the main reasons there are so many unhappy customers out there, who also feel frustrated and angry with their renovation work is because the quote for the project was grossly underestimated. Leaving these homeowners with three choices; either find the extra cash so that the job can continue, change their plans to accommodate the discrepancy or abandon the job altogether and leave it unfinished.

This situation could have been avoided with; total clarity from the customer about their needs and a complete understanding by the contractor about what is expected, preferably before the work begins.

Here are a few things you might like to consider before you start your renovation.

Prepare your budget

- It’s so easy to get carried away with all the things you would love to incorporate into your new renovation, but before you start spending you must know how much you have to spend, work out your budget and also where the money will come from. You need to work out how much you are going to need to finance the whole project.

Contact your local council offices and get advice about their building regulations

- After you work out how you will fund this project it is also important to find out all the information you can in relation to your home before you arrange a contractor. If your home is a listed building you will need to meet strict guidelines set out by the council regulators. That said most renovations have to be agreed by the planning department before work can start.

Find a reputable contractor that comes with references!

- Always speak with people you know, who have had work done. You might not get a recommendation, but this information will be invaluable when making a decision who to use, you will at least know who to avoid when looking for a trustworthy contractor. Make sure you totally understand everything they tell you and if you’re not sure ask again. Good contractors can be booked weeks, sometimes months in advance so book an appointment with them as soon as possible. Protect yourself and make sure that your contractor is fully licensed and regulated by a governing body. It’s also worth remembering that all your warranties are void if not installed by a licensed contractor.

Know exactly when you want to start and complete on the project

- Keep the lines of communication open and come to a mutually agreeable start date and a realistic completion date for the project. If you have a deadline that means the job has to be finished then let your contractor know. But no matter how well you plan your project, always keep in mind that unforeseen problems can occur and they will delay your project.

Do your research, know exactly what items you want and where you will buy them

- Deciding on the items and brands you want might take some time, especially if you are looking for that something special, but at the same time suits your needs. A good place to start would be on-line catalogues; they can give you some great ideas, the dimensions and availability, all at the click of a button and all from the comfort of your own home. If you already have a style in mind then this will narrow down the time you spend searching. Keep a note of all the room sizes will come in handy when deciding what to buy, you will at least know that it will fit. If in doubt you can always speak to your contractor and get advice about your ideas. They will give you valuable feedback and if they say that a your choice is not suitable, find out why. It might be because it will take extra work installing, especially if it wasn’t discussed at the planning stage. The extra work could not only set back the completion date but could take extra pounds out of your budget.

Have your plans drawn up, agreed and ready to go

- It is vital that your plans are drawn up professionally, especially if the renovation is your bathroom or kitchen. Discussing the plans with your contractor will give them an idea of which items you hope to put in and what preparation work will need to be done, which will be helpful when it comes to installing the plumbing.

Purchasing products

- When deciding which items you want for the project it’s sensible to find out if they are in stock and when they can be delivered. Some goods like taps and toilets are always in stock, while others luxury items like spas and vanity units might have to be custom made and could take weeks for delivery. It’s worth knowing that with any custom made item the cost is usually non-refundable, so better to confirm your choices with the contractor before placing an order. Also, to prevent any unnecessary delays, find out which items need to be ordered first, these might be the shower base, bath or spa and mixers, particularly if they are being wall mounted.

What should I purchase myself?

- When it’s time to purchase your main items for the bathroom, kitchen and laundry make sure that you do this yourself. Taking the responsibility and making the decisions will be a leading factor in achieving the results you are looking for. Smaller fittings for the plumbing can be purchased by the contractor.

What services are available to my property?

- One of your bigger decisions is whether you want gas or electric appliances. If you live out in the countryside, you may need to consider LPG appliances. You may decide to change from electrical appliances to gas, or vice versa, buy always speak with your contractor and determine if these changes are cost effective and worthwhile. It’s a good idea if you are building a new home to decide which appliances you would like and where they need to go before building begins.

What sort of hot water heater do I need?

- With a wide range of hot water heaters available it can sometimes be quite overwhelming when it comes to choosing the right one for you. If you choose to replace an old existing unit your choices could be limited and you should ask your contractor for advice. There are two type of heaters to consider, instantaneous and storage. Instantaneous heaters unlike the storage only heat the water that is needed, although more expensive to install they are much more energy efficient and in the longer term will save energy and money.

You may think that some of these points are obvious, but many of the problems arise when you, the customer start taking your contractor for granted, especially when it comes to your renovation. If you fail to make sure that everything is covered, you run the risk of not only investing a lot of money and time, but you could end up with a job that you are unhappy with.

Remember, this is your home and it’s your responsibility to make this job run smoothly as possible to ensure that you are totally satisfied once the job is finished.

Your Basement – Another Living Space Just Waiting for You!

When you decide you want to redesign your basement, what’s next?

The Program: The initial step in remodeling a basement would be to sit lower together with your contractor to develop the very best use for the basement. Your contractor will draft plans according to your parking space and what use you choose.

Permits: The next phase to remodeling a basement is to get the permits required to refinish the basement and transform it into a safe and functional living space. Different states require different safety precautions to become installed or require special permits for the way the area will probably be used. Your contractor will have the necessary permits for that redesign, ensuring all the local codes and needs are satisfied to ensure that the redesign goes with no hitch and plans will not have to be transformed or stopped half way through. When the right permits happen to be acquired, the reworking can start.

Waterproofing: Ensuring the basement is waterproof is a vital initial step in almost any basement redesign. A moist basement can produce mildew and mold that’s not just hazardous for your health, but could also damage possessions. Waterproofing a basement typically entails sealing any cracks within the concrete walls, squirting a waterproofing seal around the walls, and setting up a sump pump or French drain to assist stop your basement from flooding throughout rainstorms.

Framework: When the basement continues to be waterproof, the walls will be ready to be presented for the way you need to make use of the space and also the design you are thinking about. When framework the walls, it is important that they’re built around existing plumbing and electrical conduits, and access sections are for sale to any valves or junctions that should arrived at later.

Fire proofing: After framework the walls, it is time to fireproof the region. Fire proofing involves setting up fire obstructing and fireproof insulation.

Insulation: Setting up insulation can help keep your new space comfortable during the cold months and summer time. Additionally, when the space will be utilized for a house theater, soundproofing insulation ought to be installed.

Electrical and plumbing: Setting up rough plumbing and electrical happens. What type of plumbing or electrical will have to be installed will rely on exactly what the basement is going to be employed for and what type of appliance is going to be installed.

Sheetrock: When the rough electrical and plumbing continues to be place in, it’s time to sheetrock and make preparations the walls. Once more, you should leave access sections for just about any electrical or plumbing junctions or valves that should be accesses later. Following the sheetrock continues to be set up, it will have to be spackled and eager prior to it being colored. It’s throughout this task that trims are installed.

Ceiling: Setting up the ceiling happens, and in some cases you will find a couple of possibilities in regards to what type of ceiling to set up. Drop roofs and drywall roofs are the most typical, with each having their advantages within the other, and really should be selected with respect to the space and just how the basement is going to be used.

Painting and finishing: When the ceiling continues to be installed, the region is able to be colored and handle. Any sort or color fresh paint may be used, but light colored walls will always be suggested to create the area look lighter and much more open.

Flooring: The ultimate part of remodeling a basement is to set up and finished the ground. Based on exactly what the space is going to be employed for, wooden flooring or carpet can installed, or even the concrete flooring could be left and colored and handle.

A renovated basement adds value and functionality to the home, and may give a new and enjoyable space for many years. With a decent contractor plus some imagination, this underused space may become a captivating new room that may serve numerous reasons.

In excess of 3 decades, Potter Contracting continues to be supplying commercial and residential clients using the greatest standards of quality in construction and designs. Our organization motto is okay Craftsmanship for each Part of your house – reflective of the standard and pride we provide every job.

Our status for expert craftsmanship is really vital that you us that people guarantee brand new work with a complete 10 years. We support this industry-unique pledge to the clients and also have since our business started. We trust that when you evaluate the information and portfolio on our website, and talk to us personally you’ll be positive about choosing us for your house improvement needs.

Since 1984 Potter Contracting provides the greatest industry standards for quality in construction and designs for commercial and residential clients. With extensive professional experience and expertise varying from whole-house makeovers and additions, interior living area remodeling, to minor repairs, to making elements to grow outside living conditions, we continuously make an effort to satisfy our clients’ anticipation, needs, time agendas, and budgets. Our greatest priority is quality as shown by our status for expert craftsmanship. Potter Contracting guarantees brand new work we perform for any full 10 years.

Top 10 List of Packing Materials Needed When Storing Your Items

Packing materials are actually more important than anything else. You need suitable materials to pack and store your items and you want to know that they’re secured and will not fall apart anytime. Do not get any normal material such as the carton box from the new TV set or plastic bags from the supermarket. Get a good quality one so that they’re protected from elements such as dust and dirt.

Mattress Cover
Mattress covers are made of transparent polyethylene which are durable and have the ability to repel dust and provide reasonable protection. The transparent covers also allow fast access to your items when the need arises.

Paper Blankets
Paper blankets are usually made of 5 ply materials and when wrapped around household items such as tables and chairs are able to protect from knocks and scratches while in storage.

Bubble Wrap
Bubble wraps are a must have material and they are extremely versatile and provides protection and cushioning for everything that is fragile. Bubble wraps protect from scratches and scraps and are also extremely cheap if you get in bulk.

Shrink Wrap
Shrink wrap provides a skin tight protection that is not only cost effective but also easy to use. Items that are shrink wrapped are protected from elements such as rain, sun and even dust.

Adhesive Tape
Adhesive tapes are must have items to tape and hold down your items and taping boxes, bubble wraps and covers.

Gaffer Tapes
Gaffer tapes are extremely strong and sticky and are used in situations where normal adhesive tapes are not strong enough to secure and tape down the boxes. Gaffer tapes can also be used to tape down electrical wires to prevent tripping and falling.

Archive Boxes
Archive boxes are bigger and sturdier boxes as compared to the regular carton boxes that can be used to store items more securely.

Cardboard Boxes
Cardboard boxes are the basics of storage and are commonly used everywhere for storage. They offer basic protection and simple storage and can be often gotten for free at the supermarket or electronic stores. They also come in different sizes that can be used to store different items.

Void Fill
Void fills fill up the excess space in the box and prevent the items inside from moving due to space available. They are cheap and very useful when storage items.

Newspaper
Newspaper is cheap and abundant and sometimes is the thing to protect your fragile items such as china vase and glass. Newspaper is often used in conjunction with bubble wrap to offer a more secured protection. Wrap the newspaper around the fragile item and it will prevent scratches.